- CoreTec is the LVT Luxury Vinyl Tile manufactured in the form of slats or tiles; You can place them as mosaics. The manufacturing process is revolutionary as it results in a high-quality wood simulation that is waterproof and easy to install.
- CoreTec flooring is beautiful, low-maintenance vinyl tile that has all the aesthetic qualities of hardwood flooring. While CoreTec materials are easy to install, they also require a certain amount of time and effort to maintain the surface.
- To properly clean your CoreTec floor, follow a few simple maintenance steps. Your bedroom floor may look beautiful for years. Read on to find out how!
CoreTec Flooring - Introduction
What's the best way to give your home a sophisticated look without breaking the bank?
We are here to tell you that there is nothing better than CoreTec flooring, highly durable waterproof vinyl plank flooring, the combs:
- the advantages of vinyl flooring, with
- the grandeur of the hardwood floors;
Isn't that exactly what we've been looking for all this time?
The question now is not to invest in vinyl floors. Rather, our real concern is that the floor is durable and in good condition.
In this article we will detail:
- which cleaning agents you use to clean your CoreTec,
- why you should avoid direct light on the floor,
- how to prevent dust-related scratches,
- if warm water, vinegar or soap is to be used for cleaning,
- whether to use a vacuum, broom or mop to clean CoreTec floors;
The charming CoreTec made of vinyl with its beveled edges is reminiscent of real wooden planks.
However, since it's not made of wood, there are more ways to clean your CoreTec (as long as you use the right cleaning products and equipment).
Keep exploring this article and adopt new daily routines to keep your CoreTec floors looking like new.
We can't wait to find out how to properly clean CoreTec floors. Are you ready?
CoreTec vinyl flooring products are supplied as planks with beveled edges. This quality makes them look like hardwood floors. However, the properties and cleaning methods of this floor covering differ significantly from those of a parquet floor. Take this into account before the first cleaning!
CoreTec floors are easy to lay and clean. The popular angle lock system allows for simple preparation and easy installation into most existing floors. Checkritual of breakingfor more tips for the home.
Advice: If you don't like installing vinyl flooring and the non-abrasive sticky pads won't touch, contact professional flooring services. It might be a better option than installing CoreTec flooring yourself and getting it wrong (although, really, there's not much wrong).
Before we start cleaning vinyl floors, let's take a quick look at the painting process and its requirements.
What you need is a simple bucket, all-purpose cleaner, sponge or cloth, putty, putty knife, medium-grit sandpaper, vacuum cleaner, microfiber cloth, degreaser, rubber gloves, eye protection, blue masking tape, small paint brush, primer , large brush or roller, porch and floor paint;
With this set of handy tools, you can start painting a vinyl floor, which is a cost-effective way to update your CoreTec flooring when it's seen better days.
First, fill a bucket with warm water and some all-purpose cleaner. Then dip a sponge or cloth into the cleaning solution and use it to remove any dirt or wax deposits from the CoreTec floor covering. Let it dry and have a coffee as a reward for a job well done!
If your floor is now dry, check the vinyl surface for cracks or holes. If necessary, fill them with putty and smooth them with a putty knife. Lastly, sand them down with medium-grit sandpaper.
Vacuum floor to remove dirt and wipe with a damp microfiber cloth. We want to remove all traces of dust. Now!
We know that cleaning and priming are tedious tasks, but remember that each step is important to achieve a painted surface that lasts.
Apply degloss remover to the vinyl floor with a clean cloth and allow the floor to dry. Using this product removes the shine from vinyl flooring, allowing paint to adhere more easily to the surface.
Before picking up a gloss remover, wear rubber gloves and eye protection. When using this product, it is better to ventilate the room with fresh air.
Using a large brush or roller, apply a thin coat of primer to the floor. After drying, apply a second thin coat and allow the floor to dry again.
Advice: Be sure to check the instructions on the paint can to determine the required drying time between coats.
Apply a second thin coat of paint.
Applying two or more coats of paint over two or more coats of primer will help make the surface more opaque.
Even a typical run-of-the-mill latex varnish may look good on your Coretec floor for a while, but that joy won't last long. Therefore, use one color for the porch and floor, as they were purposely created to withstand foot traffic.
Speaking of protection: one of the most popular and effective ways to protect CoreTec floors is to use protective matting.
We usually place carpets on the outside of the entrances and exits of the house.
Your task is:
- Absorbs dirt and moisture and
- Pick up excess dirt, sand, gravel, oil, asphalt, garage sealer, and other debris that would otherwise haunt you inside;
And don't forget the shoes! When walking on CoreTec floors, avoid:
- High jump,
- nails, the
- golf shoes with pinchos;
These shoes can scratch and dent your luxury vinyl flooring.
Consider using a durable pad under furniture legs to protect your vinyl floors from scratches.
These "invisible" protectors of your CoreTec floor covering minimize mechanical damage;
Knowing how to clean CoreTec efficiently is helpful, but learning not to make a mess or damage your floor is even more important.
Advice: Use rugs with 100% latex backing; those with rubber backing can discolor the floor.
Let's say you've just installed CoreTec flooring in the main room of your apartment.
At this point, remember not to place any furniture on the floor until the joint compound and adhesive under the vinyl planks have had time to dry.
- vinyl floors with grout need 48 hours,
- other vinyl floors take 24 hours;
So always be careful when moving heavy equipment across CoreTec floors.
CoreTec flooring is durable, but always make sure your vinyl flooring products are protected from severe mechanical damage or cracking in some way.
Advice: To move larger pieces, take plywood or plywood, spread them out on the floor, and place the piece of furniture or appliance on top. Then slide, roll, or roll it across the boards.
Heavy furniture that is moved infrequently should have large, flat legs, wheels, glass or protective flooring with a non-staining surface, smooth flat glides with self-adhesive felt pads.
Important: Avoid using small and narrow domed metal sliders.
Periodically inspect the non-abrasive pads for wear and replace as necessary.
Moving and mobile equipment should have 2" diameter wheels and ¾" hard rubber steps that do not easily stain or roll.
Keep your flooring away from heat hazards, as they can burn, fade, or discolor your flooring.
Avoid direct contact of your CoreTec flooring with:
- intervals and
- other heat generating devices or hot air coils that produce heat over 120°F;
What looks like glaring natural light to us can be devastating to our luxury vinyl signage.
Coretec floors require UV sun protection.
The materials that make up these durable CoreTec floors can fade or discolor if overexposed to strong sunlight.
Make sure window coverings remain closed during the brightest periods of the day.
Fortunately, there are many window treatments available that prevent UV rays from affecting your beautiful CoreTec flooring.
Cleaning is crucial to keeping your CoreTec flooring in good condition, but to keep your space looking really good, you need to polish the surface.
While cleaning your floors keeps them looking their best, polishing them takes them to a higher level of improvement.
Unfortunately, vinyl flooring loses its natural shine and shine over time. To prevent this from happening, especially if your space receives a lot of traffic on a regular basis, consistently apply a good quality floor polish product. Also, choose a product designed specifically for vinyl flooring to ensure protection against potential wear and tear.
Few people have ever fallen in love with routine cleaning. But here we are, talking about it again! And there is a good reason for it. Nothing adds durability and style to your luxury vinyl floor like the correct cleaning habits.
Always follow a few general rules when cleaning your CoreTec floor. We will examine them in the next paragraph.
Before we start cleaning CoreTec floors, let's get one thing straight. You should check the manufacturer's recommendations for your specific flooring product before using a vacuum, wet mop, steam mop, or any other cleaning method. Trust us, the last thing you want is to void your warranty due to improper care.
The wear layer material of CoreTec floors has a thickness of up to 20 mm and is therefore very durable with good care.
Your vinyl floors deserve proper care, so equip yourself with some cleaning products, a vacuum cleaner, soap, and mops.
First, let's see what we have on the routine cleaning menu:
- to sweep,
We cannot stress enough the importance of cleaning vinyl flooring regularly to prevent a buildup of dirt or harsh substances that can scratch or dull the floor, especially over the long term.
- Vacuum cleaner
Can you use a vacuum on luxury vinyl planks?
Fortunately, you can safely use a vacuum on vinyl, but it must be designed specifically for hardwood floors.
Lightweight vacuums are the best. In particular, you may want to look for ones with rubber or felt wheels, as they won't leave scratch marks (find stick and canister vacuums).
If you use a vacuum, avoid using an impact brush, as it can damage the floor.
If you choose an upright vacuum, make sure it either lifts the rotating brush (also known as a scraper bar) out of the way or has the ability to completely remove the wand by hand with rotating bearing rods.
The beater bar is the rotating brush that sweeps the carpet pile so clean. However, it works so "well" that with its spinning rods it can easily damage your vinyl finish.
Before you wet CoreTec flooring with water, make sure you have removed as much dust and dirt as possible with a dry microfiber mop or vacuum cleaner.
As insignificant as it may seem, sweeping can be one of the most important activities to keep your CoreTec floor clean.
Regularly sweep your CoreTec floor with a broom to keep it clean and tidy. Vinyl is more resistant to damage and scratches than laminate.
Important: As with laminate flooring, your goal is to minimize the amount of water you use on vinyl planks because of the risk involved: if water seeps between the planks, it can loosen the adhesive, cause the tiles to warp or even cause mold. in the underground. Use only water to remove stubborn dried residue. Some sources claim that since vinyl is waterproof, you don't have to rush to dry it afterward. However, even waterproof LVPs are not 100% free of water-related hazards.
- Microfiber mops – Work great for removing dust that accumulates in corners and low-traffic areas (for example, under tables and floor lamps).
Advice: To maximize effectiveness, sweep the mop in an S-shape without drawing your strokes.
- Traditional Broom and Dustpan - Ideal for large debris and less effective with smaller particles.
Small dirt particles are not so harmless: Beware of potentially significant damage to the LVP polyurethane coating if you stick small, sharp dirt particles to your shoes, slippers or a damp mop.
Respond immediately if spilled. Clean them with a damp mop or cloth.
If it seeps into the floor or gets into the cracks in the floorboards and you rub more of the liquid, it will continue to massage into the floor.
Therefore, use a cloth or paper towel to soak up the liquid in gentle motions using warm water and a mild detergent (for example, dish soap) to remove any juice stains or other sticky residue.
Then rinse with clean water to remove any soap residue. For vinyl floors, avoid abrasive cleaners (non-abrasive pads are your best bet), harsh detergents, and spray cleaners, as they often leave a dull residue.
To treat problematic spills or stains, you can use isopropyl alcohol.
- trapeador humido
When it comes to wet cleaning, feel free to dry your CoreTec floor. However, do this only after removing most of the dust and dander from the floor with a dry mop or broom.
For vinyl floors, choose a non-abrasive microfiber mop; This has been proven to be the best way to take good care of a vinyl plank. Abrasive pads or treated dust pads may damage the floor.
CoreTec floors are resistant to water, mold and mildew, allowing you to use wet cleaning methods.
Important: Do not use a steam cleaner on your vinyl floor. The grooves between the vinyl planks make them vulnerable to heat and moisture. Also, a steam mop can damage the floor by loosening the adhesive between the layers of flooring.
Always use a neutral pH cleaner diluted in cold water. Some spray cleaners are carefully designed to leave no residue after cleaning. Clean CoreTec floors fast by trying different types of PH neutral cleaners (some cleaning brands use affiliate programs).
CoreTec recommends Encore Floor Cleaner because it is pH neutral, effectively removes dirt, grease and scratches, leaving your floor sparkling clean (no rinsing required);
Encore works perfectly for hard floors like
- laminated and
- elastic floor covering;
Clean the floor from time to time with a resilient floor cleaner.
In short, it's best to always use proper cleaning products and equipment to sweep, mop, mop (check all the wet cleaning features on your vinyl plank flooring) and polish your CoreTec floors (look for that specific floor polishing product). .
Let's look at a few more DIY techniques to help you care for your CoreTec floors.
Apple Cider Vinegar is one of the most effective cleaning agents for keeping CoreTec floors fresh.
Take a gallon of water and pour in a cup of apple cider vinegar.
Clean this apple cider vinegar mixture without leaving a residue on the floor with a damp mop to remove all the dirt.
Advice: Don't worry about the smell. It will naturally disappear when the floor is dry. You can also mix your solution with a dash of jojoba oil to help neutralize odor while you work with it.
Apple cider vinegar is perfect because:
- strong enough to clean and
- soft enough not to damage floors;
If large areas of your vinyl flooring are covered in stains, use baking soda.
Mix in a little water to make a paste and apply with a soft cloth.
But vinegar and baking soda can work as a team too!
If your vinyl plank flooring has become dull, the cause could be an unexpected buildup of soap scum after too many cleanings.
If so, try to fix it with a homemade solution. First, mix equal parts vinegar and baking soda into a paste. Then, to test the effectiveness of your mixture, apply it to a small, inconspicuous area of the floor and gently rub it in. Finally, rinse with clean water.
- How do Allbirds wash?
- How do you clean Fuzzy Crocs?
- How to remove wax from clothes?
- How to remove the smell of sulfur from clothes?
- How much does Plato's Closet pay for clothes?
Encore is our recommended cleaner for COREtec floors. This pH neutral cleaner removes dirt, grease and scuffs to leave your floor sparkling clean - with no need to rinse! Encore is specially formulated for cleaning all types of hard surface flooring including hardwood, ceramic, laminate and resilient flooring.Can you use vinegar and water on COREtec flooring? ›
Just take a gallon of water and pour a cup of apple cider vinegar into it. Using a mop to wipe directly over the flooring will get rid of all the dirt without leaving any residues or traces.How do you maintain a COREtec floor? ›
Spray neutral pH cleaner, such as Encore, COREtec Cleaner or equivalent neutral pH floor cleaner, onto the floor in manageable areas (spray mist will dry quickly). Use a microfiber wet mop pad to mop the floor with cleaner. If pad becomes dirty, be sure to replace the pad with a new microfiber wet mop pad.What should you not clean vinyl plank flooring with? ›
- Never use steel wool or abrasive scrubbers to clean your vinyl floor.
- Avoid using detergents, soaps, abrasive cleaners or products intended to add shine to your floors. ...
- Don't use wax or solvent-based polishes.
- Don't use ammonia or ammonia-based cleaning solutions.
Why Bona Floor Cleaning Products Are the Best. No floor cleaning product inspires so much trust and devotion as Bona. The century-old Swedish company has developed the best hardwood floor cleaners on the market, and their “Stone, Tile & Laminate” cleaner works beautifully for LVT flooring such as COREtec.How do I keep my vinyl floor shiny and clean? ›
One of the best cleansers for vinyl flooring is apple cider vinegar. The acidity in the vinegar helps remove dirt and grime without leaving a buildup of soap or wax. Simply mix one cup of cider vinegar with a gallon of hot water and use a damp mop to clean, rinsing the mop frequently with hot water.How do you clean high quality vinyl plank flooring? ›
One of the best vinyl plank flooring cleaners is a cup of apple cider or white vinegar in a gallon of hot water. Dampen your mop, and mop your vinyl plank flooring in the direction of the planks. The vinegar will tackle dirt, grime, and stains without leaving behind streaks or a sudsy mess.Will white vinegar harm vinyl planks? ›
Like with hardwood floors, vinegar's acidity will take away the shine and sheen of a no-wax floor, such as vinyl and linoleum.Will vinegar damage vinyl plank floors? ›
Using Vinegar to Clean Luxury Vinyl
While vinegar is a common ingredient in many homemade floor cleaners, it shouldn't be used on certain household surfaces because it can cause damage. Fortunately, luxury vinyl flooring isn't one of those surfaces. In fact, apple cider vinegar makes an excellent vinyl floor cleaner.
They confirmed that steam mops should not be used on Coretec Plus, nor their other brands of luxury vinyl plank. In fact, if you use one, it invalidates the warranty.
COREtec flooring is scratch resistant against minor scratches, but it's not scratch-proof. You'll likely find noticeable scratches if heavy items such as furniture is dragged across the floor.How do I keep my vinyl floor looking new? ›
Use a damp mop to apply to the floor, rinsing the mop frequently with clean, hot water from another bucket or your sink. For extra cleaning power, add a few drops of liquid dishwashing soap to the water and vinegar mixture. Mop first with the soap mixture and then mop a second time with the water and vinegar mixture.What kind of mop is best for vinyl plank flooring? ›
Microfiber mops are a popular pick for cleaning vinyl and other types of hard flooring. These mops can be used for both dry dusting and wet mopping floors. Combined vacuum and mopping devices offer a two-in-one clean with minimal effort.Can I use a steam mop on vinyl plank flooring? ›
You can use almost any floor cleaner on your LVT floor, except for a steam mop. The steam that comes out of a steam mop can be detrimental to your luxury vinyl floor. The heat, steam and moisture can penetrate into the LVT flooring tiles and cause damage.Can you use Swiffer wood cleaner on vinyl plank flooring? ›
Yes! a Swiffer WetJet can be used on luxury vinyl flooring. Maybe you used Swiffer products in the past, or perhaps you have heard all the hype regarding the convenience of the Swiffer system and are interested in its suitability for your flooring.Are Swiffer wet pads safe for vinyl plank floors? ›
Swiffer wet cloths are designed to be used on most floor surfaces, such as: vinyl.Is Bona Spray mop good for vinyl plank flooring? ›
The Bona Hard-Surface Floor Cleaner is an excellent choice for cleaning luxury vinyl flooring and other hard surface floors.Can you use Murphy's Oil Soap on luxury vinyl plank flooring? ›
Can you use Murphy's Oil soap on vinyl floors? Yes-Murphy Oil is a great choice for vinyl floor cleaning since it's clear and 98% derived from natural ingredients.Why are my vinyl floors still dirty after mopping? ›
Mopping with dirty water usually causes that buildup and dirty appearance, even though it was just mopped. Dirt is added to a mop bucket each time the mop is dunked into the water, if you don't change the water you are just transferring the dirt and grime around the floors through the dirty water.Why does my vinyl floor always look dirty? ›
Vinyl floors often have uneven surfaces because of their texture. Dirt may get into these small grooves and ridges, making the floor look dingy. Sometimes this gets waxed over, making it even harder to remove.
To clean your vinyl floors, you can use a gallon of water mixed with 1 cup of apple cider vinegar. This is a very effective solution for removing all sorts of stains from vinyl floors.Is Mr clean OK for vinyl plank flooring? ›
Safe for use on glass, laminate, plastic, rubber, tile, and vinyl surfaces.What should you not use on vinyl? ›
Avoid using ammonia-based cleaning solutions. Don't use bleach as an overall vinyl floor cleaner. Keep away from highly abrasive scrubbers or detergents on vinyl. They can damage the floor, causing cracks or scratches.What can ruin vinyl flooring? ›
Sweep, dust, or vacuum, your floor on regular basis. Be careful while moving furniture or appliances through vinyl floors. Dragging the heavy furniture or appliance can damage the floor badly. Always try to use a plywood path to drag the furniture.Can you mop vinyl flooring? ›
The best way to clean vinyl floors without streaks is to dry mop first to remove dirt. Next, mix white vinegar and water in a bucket and wet mop the floor. Use WD-40 to remove grease stains. Finally, buff the floor with a dry cloth to remove excess water.Is COREtec flooring really waterproof? ›
With its use of recycled wood, bamboo dust, limestone, and virgin PVC, all COREtec Plus, XL, HD, and Design products are 100% waterproof. This means that wet areas are no longer a problem in your home! COREtec won't swell, expand, or contract.Is COREtec flooring laminate or vinyl? ›
COREtec Plus is made by US Floors, a manufacturer of unique and sustainable floors based in Dalton, Georgia. It is a luxury vinyl floating floor that doesn't need to be nailed or glued down to the subfloor. Instead, the tiles or planks lock into place (see the installation video at the end of this article).Can you use bleach wipes on vinyl plank flooring? ›
Avoid cleaning a vinyl floor with bleach: It's a harsh cleaner that can lead to corrosion or damage to the vinyl finish. To that end, skip the ammonia and “mop and shine” products, too.How do I clean my COREtec LVP? ›
As a rule, COREtec recommends using Shaw's R2X Hard Surface Cleaner for cleaning their products. For stubborn spots that R2X won't remove, gently buff the spot with isopropyl rubbing alcohol on a clean white towel.What problem are there with COREtec flooring? ›
Occasionally, COREtec products are said to have buckling issues and some cupping problems. This can also be caused by excess moisture underneath the flooring. While the plastic or vinyl flooring shouldn't technically be susceptible to moisture, it can react over time if there is an excess of damp air.
The biggest differences between those brands and COREtec Plus are the core materials and colors/finish options. Proximity Mills, for example, is very similar to COREtec—but it's made with an SPC core and comes with a more affordable price tag.How do I bring the shine back to luxury vinyl plank flooring? ›
Here is how you can make your vinyl floor shine with a homemade baking powder solution: Mix 4 tablespoons of baking soda with a gallon of warm water. Stir the mixture until the baking soda is dissolved. Use a damp mop to spread the mixture across the floor and let it sit for around 10 minutes.Can you mop vinyl flooring everyday? ›
Every day if you can. However, make sure you're not using excessive water. Using a damp mop to clean vinyl floors every day can prevent a buildup of dirt and keep your floors looking fresh.What floors should not be steam mopped? ›
But, most experts don't recommend steam mops for wooden or laminate flooring, or for surfaces with potential gaps such as vinyl tiles or vinyl planking. A hardwood floor may have small cracks that are invisible to the naked eye.Can you vacuum luxury vinyl plank flooring? ›
Vacuum. Vacuuming your luxury vinyl plank flooring at least once a week will truly make a difference to the maintenance of your flooring. You can either vacuum the flooring yourself or, if you want to take the easy way out while still having clean luxury vinyl plank flooring, you can buy a roomba automatic vacuum!Can you use Bissell steam mop on vinyl floors? ›
Whatever you do, do not use steam mops. Steam cleaning is tempting because of its reputation for sanitizing. But the hot steam can penetrate the layers of your vinyl and cause them to bend and warp as well as loosen the glue that holds them together.Which Swiffer is best for LVP? ›
You can use a dry Swiffer mop pad on vinyl plank flooring products. The dry Swiffer is an excellent way to capture dust and pet hair for a thorough clean. If you use a Swiffer WetJet, you'll need to refer to your product's directions and make sure that the product is waterproof.How do you clean vinyl flooring without residue? ›
One of the best cleansers for vinyl flooring is apple cider vinegar. The acidity in the vinegar helps remove dirt and grime without leaving a buildup of soap or wax. Simply mix one cup of cider vinegar with a gallon of hot water and use a damp mop to clean, rinsing the mop frequently with hot water.How do you clean COREtec luxury vinyl? ›
CoreTec floors are durable, but you can scratch them if you use an abrasive mop. You can choose a mop with microfiber, which will provide a gentler clean. You should also opt for a gentle floor cleaning liquid that does not have an overpowering scent or coloring.What is the best thing to clean vinyl flooring with? ›
Clean off general surface dirt with vinegar. White vinegar or apple cider vinegar (without the mother) cuts through grime. It's an excellent option to spiff up your vinyl floor without chemicals. Vinegar is also great for removing any floor stickiness.
One of the best cleansers for vinyl flooring is apple cider vinegar. The acidity in the vinegar helps remove dirt and grime without leaving a buildup of soap or wax. Simply mix one cup of cider vinegar with a gallon of hot water and use a damp mop to clean, rinsing the mop frequently with hot water.Can you use Clorox wipes on vinyl plank flooring? ›
Never Use Bleach or Ammonia to Clean Vinyl Floors.Can you use Swiffer wet on luxury vinyl plank? ›
Yes! a Swiffer WetJet can be used on luxury vinyl flooring. Maybe you used Swiffer products in the past, or perhaps you have heard all the hype regarding the convenience of the Swiffer system and are interested in its suitability for your flooring.Can you use a steam mop on COREtec flooring? ›
They confirmed that steam mops should not be used on Coretec Plus, nor their other brands of luxury vinyl plank. In fact, if you use one, it invalidates the warranty.Does vinegar ruin vinyl flooring? ›
Like with hardwood floors, vinegar's acidity will take away the shine and sheen of a no-wax floor, such as vinyl and linoleum.Is Bona good for vinyl plank flooring? ›
The Bona Hard-Surface Floor Cleaner is an excellent choice for cleaning luxury vinyl flooring and other hard surface floors. Safe to use around pets and children, our floor cleaner dries quickly and leaves no residue.Is steam mop good for vinyl floors? ›
An important cleaning tip for cleaning vinyl plank floors? Whatever you do, do not use steam mops. Steam cleaning is tempting because of its reputation for sanitizing. But the hot steam can penetrate the layers of your vinyl and cause them to bend and warp as well as loosen the glue that holds them together.Can you use a magic eraser on vinyl plank flooring? ›
Alternative: The Magic Eraser Method
If you don't like using harsh chemicals but don't have baking soda on hand, a magic eraser will cut it! Moisten your magic eraser and ring out any excess water. Then, scrub the scuff mark from the floor.
You can use a dry Swiffer mop pad on vinyl plank flooring products. The dry Swiffer is an excellent way to capture dust and pet hair for a thorough clean. If you use a Swiffer WetJet, you'll need to refer to your product's directions and make sure that the product is waterproof.